35x50x14 Metal Building
1,750 Sq Ft Metal Building Size, Cost, Uses & Specifications
A 35x50x14 metal building provides a 1,750 square foot footprint with a 14-foot eave. Use this independent guide to compare real-use fit, floor planning, cost, clearance, concrete, steel building considerations and barndo potential before requesting quotes.
Floor Area
Width
Length
Eave Height
Planning Kit Range
What Fits in a 35x50x14 Metal Building?
Use the footprint first. Height determines the kind of doors, lifts, racks and tall equipment that remain practical.
Strong multipurpose garage and workshop size
Supports several vehicles when doors and circulation are planned first.
Room for benches, tools, equipment and dedicated service space.
Useful depth and height for selected RV or trailer applications after clearances are verified.
Enough area to consider a barndo or shop-house split without eliminating the work zone.
Garage + Workshop
Separate active parking from a permanent work zone so tools do not invade vehicle circulation.
Contractor Storage
Use wall storage and a protected aisle so inventory does not block daily equipment access.
Barndo + Shop
A living and shop split can work when plumbing, utilities and garage depth are established early.
How This Metal Building Behaves in Daily Use
Garages, serious workshops, barndominium or shop-house concepts, contractor storage and mixed vehicle-plus-work-space plans.
Flexible footprint
1,750 square feet can support parking, work and storage as distinct zones instead of one crowded rectangle.
Aisle discipline
An oversized bench, trailer or enclosed room can still consume the path needed to move vehicles independently.
Door strategy
Place frequent-access doors around the operating plan, not simply at even intervals across the facade.
35×50 Metal Building Layouts and Floor Plans
This conceptual floor plan shows one practical way to organize the footprint while preserving circulation, storage and a clear primary work or vehicle zone.
Primary bay
Keep the largest uninterrupted rectangle open for vehicles, equipment, material movement or the main workshop activity.
Storage wall
Concentrate cabinets and shelving on one side so circulation and the main operating zone remain predictable.
Door strategy
Confirm the real openings before fixing wall position, framing, overhead doors or large-equipment access.
35x50x14 Metal Building Cost
Kit pricing is only one part of a finished project. Use the kit number as a planning anchor, not a building quote.
$15,750-$26,250
Footprint-level planning reference for the metal building kit. Height, loads, openings, freight, erection, slab and location can change the actual quote.
$15.8K-$26.3K
Site specific
Variable
Scope specific
Optional
REALITY
CHECK
Could a 35x50x14 Metal Building Work as a Barndominium or Barndo?
This footprint sits in a practical range for a barndominium, barndo or shop house that combines living space with a garage, workshop or storage bay. The exact living-area split depends on bedroom count, plumbing walls, utility rooms, garage depth, porches and interior partitions. The eave height provides useful flexibility for combined living-and-shop concepts, subject to engineered openings and residential code requirements.
Is a 14-Foot Eave Height Enough?
Compare the current eave with adjacent metal building eave heights before you lock in doors, lifts, racking, storage or tall equipment.
Doors first
Specify the tallest vehicle or equipment and the required clear opening before treating the eave as sufficient.
Overhead clearance
Lifts, racks, mezzanines, lights and mechanical systems all compete for vertical space beneath the frame.
Height has cost
A 14 foot eave is a common shop upgrade. SteelBuildingKit.com height research models roughly a 6% to 9% kit-price step from a comparable 12 foot eave before load and opening differences.
What Makes This Exact Building Size Different?
The steel building footprint stays the same if you change only eave height, but usable volume, door options and equipment compatibility can change substantially.
Side-to-side planning
Tubular or cold-formed systems are common candidates. Width controls clear span, door layout and the amount of circulation left beside equipment.
Useful working depth
Length determines how easily parking, work cells, inventory, staging or support rooms can be separated without blocking the main path.
Vertical envelope
The eave creates about 24,500 cubic feet through the wall height before the roof volume is added.
35x50x14 Metal Building Dimensions
Two simple views make the footprint and eave relationship immediately understandable.
Concrete, Roof, Wall and Volume Calculations
Planning math is useful for comparison, but final structural and concrete requirements must follow engineered plans and local conditions.
1,750 sq ft
170 linear ft
24,500 cu ft
About 21.6 cu yd
Compare 35×50 Metal Building Sizes
Compare nearby metal building sizes to see how changes in footprint and eave height affect usable space, clearance, storage and typical applications.
1,750 sq ft
Less vertical envelope while floor area stays unchanged.
1,750 sq ft
The exact width, length and eave combination shown on this guide.
1,750 sq ft
Adds wall and enclosed volume without increasing the slab footprint.
1,400 sq ft
Changes usable floor area while keeping a comparable eave height.
Common Buying Mistakes for a 35x50x14 Metal Building
Avoid these common planning mistakes before comparing kits, foundations, door packages and contractor quotes.
The quoted eave is not the same as the usable door opening or the clear ceiling under the frame. Size the tallest vehicle, rack or lift first, then verify the engineered opening and frame depth.
A floor can hold more vehicles than it can move independently. Doors, aisles, trailer swing, workbenches and wall storage decide whether the building functions well after it fills up.
Kit pricing normally excludes some combination of slab, freight, erection, doors, insulation, electrical work, site work and permits. Compare quote scopes line by line.
The geometric concrete math on this page is useful for scale, but the engineered foundation can add footings, grade beams, piers, thickened edges and reinforcement.
Before You Request a 35x50x14 Metal Building Quote
Have these decisions ready so quotes are easier to compare and less likely to hide major scope differences.
35x50x14 Metal Building FAQ
Quick answers to common questions about dimensions, capacity, eave height, barndo fit and concrete planning.
What does 35x50x14 mean for a metal building?
It describes a building approximately 35 feet wide, 50 feet long and 14 feet at the eave, creating a 1,750-square-foot nominal floor area.
How much floor area does a 35×50 metal building provide?
The nominal floor area is 1,750 square feet because 35 feet multiplied by 50 feet equals 1,750. Eave height changes the vertical envelope, not the slab area.
Is 14 feet tall enough for this metal building?
It depends on the use. Eave height is not the same as clear door or clear ceiling height, so tall vehicles, lifts, racks and equipment should be checked against the engineered opening and frame depth.
Can a 35×50 building be a barndominium or barndo?
Strong barndominium and barndo shop-house planning range. The eave height provides useful flexibility for combined living-and-shop concepts, subject to engineered openings and residential code requirements.
How much concrete is needed for a 35×50 slab?
A simple 4-inch slab is about 21.6 cubic yards before waste, thickened edges, footings, grade beams, piers or engineered foundation adjustments.
How These Metal Building Measurements and Cost Ranges Are Calculated
For a 35x50x14 metal building, the 35-foot width, 50-foot length and 14-foot eave create 1,750 square feet and about 24,500 cubic feet through the eave, a multipurpose envelope where parking, workshop and storage zones should be separated before quote comparison. The balanced rectangular footprint can separate front access from deeper work or storage zones, but a wide overhead door may trade away useful wall space. At a 14-foot eave, compare engineered clear openings and frame depth before committing to lifts, taller doors, stacked storage or future equipment. Ask suppliers to itemize foundation assumptions, freight, erection, insulation, framed openings and local design loads, because two 35x50x14 steel building quotes can share nominal dimensions while representing materially different finished scopes and total project costs.
Width x length
2 x width + 2 x length
Footprint x eave height
Area x slab thickness